12/20 GA Shotgun Cleaning Kit

1. Two gauges, fully covered. Bore brushes matched to 12 GA and 20 GA barrels, plus a plastic patch puller sized for 12 GA — the bore work is covered gauge by gauge

2. 39 inches of reach. The 39-inch pull-through cable runs the full length of a shotgun barrel, clearing fouling and moisture in one or two passes, no rod needed.

3. Hardware included. The 6-piece screwdriver set (PH1, PH2, slotted 4 & 7, Torx T15 & T20) with the brass connector covers the screws on a shotgun, from trigger guard to optic mount.

4. Patches and puller, ready to work. 25 pre-cut 1.5 x 3 in patches and the 12 Gauge puller handle bore-cleaner and finishing passes; the brass adapter (8-32 to 5/16-26) links the two thread patterns.

5. Straight from the brush factory. Our own Ningbo plant, 20+ years in the industry (est. 2000) and OEM partner to established US brands — dependable supply for wholesale.

12/20 GA Shotgun Cleaning Kit with 39-Inch Pull-Through Cable

Everything You Need to Clean 12 Gauge and 20 Gauge Shotguns in One Case

A shotgun needs more than a bore scrub: choke threads, action, and screws all collect the same carbon. The Shotgun Cleaning Kit for 12GA 20GA is built for the two gauges most shotguns are chambered in, and it covers the whole gun — bore brushes for the barrels, a cable for the full length, a screwdriver set for the hardware, and patches for the final pass. One kit, the entire routine.

Bore Brushes for 12 Gauge and 20 Gauge

This kit is built for 12 Gauge and 20 Gauge shotguns. The two bore brushes match those gauges and lift plastic, lead, and powder fouling from the barrel, keeping your shotgun pattern-consistent round after round; the plastic patch puller fits 12 Gauge, and the 39-inch cable reaches the full length of a shotgun barrel (fits barrels up to about 32 inches, including the 39-inch overall with handle margin). If your shotgun is a different gauge, or you are unsure which size fits, measure the barrel or send us your model before ordering — we will confirm compatibility.

39-Inch Pull-Through Cable for Full-Length Barrels

The 39-inch pull-through cable with black T-handle reaches the full length of standard shotgun barrels without a rigid rod, making field and range cleaning fast and simple. The cable ends are brass-threaded so the bore brushes screw on and off for quick changes between 12 and 20 gauge.

Fig.5 — Alt: Pull-through cable with black T-handle, brass-threaded cable ends and bore brush, 12/20 gauge shotgun kit

Screwdriver Set, Brass Adapter and 25 Patches

A 6-piece screwdriver set (PH1, PH2, slotted 4 & 7, Torx T15 & T20) handles optic and action screws, while the brass adapter (8-32 to 5/16-26) bridges the two common cleaning-tool thread patterns and the brass connector fits the screwdriver handle. For the bore finish, seat a patch on the plastic patch puller — sized for 12 Gauge; for 20 Gauge barrels, thread a patch directly on the cable instead.

What's in the Box

Every one of the 39 pieces in the Shotgun Cleaning Kit for 12GA 20GA is listed below:

• 2 × Bore Brushes — 12 GA / 20 GA (copper wire)

• 1 × Double-Ended Cleaning Nylon Brush

• 1 × Black Handle

• 1 × 39 in (99 cm) Pull-Through Cleaning Cable

• 1 × Screwdriver Set — 6 pcs (PH1, PH2, 4, 7, T15, T20)

• 1 × Plastic Patch Puller — 12 GA

• 1 × Brass Adapter — 8-32 to 5/16-26

• 1 × Brass Connector — for the screwdriver handle

• 25 × Cleaning Patches — 1.5 × 3 in

How to Use the Pull-Through Cable

Barrels first: run the gauge-matched bore brush with a bore cleaner through each barrel, then pull the 39-inch cable through once or twice to clear the bore.

Chokes and action: the double-ended nylon brush scrubs the action and choke threads while the screwdriver set handles the hardware.

Final pass: seat a patch on the 12 Gauge puller for a bore-cleaner pass, then finish with a dry patch — that closes out the routine, and the Shotgun Cleaning Kit for 12GA 20GA has covered the whole gun.

Always confirm the firearm is unloaded and follow your owner's manual before cleaning.

Factory-Direct from a 20-Year US-Market OEM

Twenty years of brush manufacturing, an 8-acre plant floor in Ningbo, up to 600,000 brushes a month, and a production history that includes Remington®, Cabela's®, Bulldog®, and Birchwood Casey® — those are the numbers behind this kit. The brand behind it is Huntimes, our own, and the same factory ships to the United States, the European Union, and Australia. For a dealer, that is a complete 39-piece shotgun kit backed by two decades of manufacturing for the American market.

OEM and private label: our Ningbo factory (est. 2004; 8 acres; up to 600,000 brushes a month) has made brushes for established US brands since 2000, and it can build your kit — custom contents, custom packaging, your brand. Send the quantity and specifications for a quotation.

Frequently Asked Questions

Q1. Which shotguns does this kit fit?

A1. This kit is built for 12 Gauge and 20 Gauge shotguns. The bore brushes match those gauges, the plastic patch puller fits 12 Gauge, and the 39-inch cable reaches the full length of a shotgun barrel. If your shotgun is a different gauge, or you are unsure which size fits, measure the barrel or send us your model before ordering — we will confirm compatibility.

Q2. How do I use the patch puller and the brass adapter?

A2. Thread a cleaning patch into the slot of the plastic patch puller and pull it through the bore to apply a bore cleaner or lift fouling; the puller in this kit fits 12 Gauge barrels (for 20 Gauge, thread a patch directly on the cable). The brass adapter (8-32 to 5/16-26) bridges the two common cleaning-tool thread patterns, so tools with either size connect to the handle. Unload the firearm first and follow the owner's manual.

Q3. What are the screwdriver bits for?

A3. Six bits cover common shotgun hardware: PH1 and PH2 Phillips bits for trigger-guard and stock screws, slotted 4 and 7 for sight and bead screws, and T15 and T20 Torx bits for optic-mount and accessory fasteners. The brass connector for the screwdriver handle is included with the set. Use the matching bit by hand — these are maintenance tools, not breaker bars.

Q4. How do I use the 39-inch cable?

A4. Pull it through the barrel from chamber to muzzle — or muzzle to chamber, per your firearm manual — once or twice to clear fouling and moisture after brushing. At 39 inches it reaches the full length of a shotgun barrel (fits barrels up to about 32 inches, including the 39-inch overall with handle margin). Unload the firearm first and follow the owner's manual.

Q5. Do you offer wholesale, OEM, or private-label orders?

A5. Yes. Our Ningbo factory (est. 2004; 8 acres; up to 600,000 brushes a month) has made cleaning tools for established US brands since 2000. Private label, custom kit contents, and custom packaging are available — send your quantity and specs for a quotation.

Q6. How is the kit packaged, and what are wholesale terms?

A6. Each kit ships as a complete 39-piece set, every component accounted for. Wholesale orders can be packed in retail-ready boxes, display cartons, or bulk master cartons. MOQ and lead time depend on order size and customization — ask our sales team; we ship to the US, EU, and Australia.

Fig.1 — Alt: 12/20 gauge shotgun cleaning kit with 39-inch pull-through cable, two bore brushes, bit set and patches in green case

Fig.3 — Alt: Portable 12/20 gauge shotgun cleaning kit in green case with clear lid, hanging loop and sliding latch

Fig.2 — Alt: 12/20 gauge shotgun kit case interior with pull-through cable, two brushes, bit set and handle in molded slots

Fig.4 — Alt: Complete 12/20 gauge shotgun cleaning kit flat lay with two bore brushes, pull-through cable, bit set, patches and handle

Fig.6 — Alt: Bore brush close-up with 20 gauge stamped on hexagonal base and brass-threaded cable end